2007-2017年中国沙尘气溶胶的三维分布特征及输送过程     

贾瑞  刘玉芝  吴楚樵  祝清哲  汪兵 《中国沙漠》2019,39(6):108-117

利用最新发布的CALIPSO产品，构建了2007-2017年中国沙尘气溶胶的三维分布，并结合HYSPLIT-4模式和再分析数据，探讨了沙尘的三维输送过程。结果表明：中国的沙尘排放源区主要是塔克拉玛干沙漠和巴丹吉林沙漠，沙尘气溶胶出现频率分别为60%和35%。塔克拉玛干沙漠排放的沙尘主要（50%~70%）停留在源地0~6 000 m高度，少部分向东输送至甘肃和内蒙古；巴丹吉林沙漠排放的沙尘则主要向东输送。中国沙尘排放量在春季最大，向东输送最强；夏季，东亚夏季风限制了沙尘向东输送；秋季，沙尘排放减弱，输送强度和夏季相当；沙尘排放量在冬季最小，输送最弱。夏季，沙尘在输送过程中可被抬升至高度5 000 m以上，春季次之，秋、冬季的沙尘主要在低层大气输送。沙尘在向东输送的过程中被抬升并和当地人为污染物混合变为污染性沙尘，华北地区污染性沙尘出现频率高达30%；输送到海洋的沙尘也会与洋面上（0~3 000 m高度）的海盐气溶胶混合，出现频率约为10%。  相似文献   

“蛟龙”号载人潜水器运行与保障信息管理系统设计与应用          下载免费PDF全文

高翔  孙超  丁忠军  宋宏  赵晟娅  祝普强 《海洋开发与管理》2018,35(11):19-26

2017年我国"蛟龙"号载人潜水器完成了为期5年的试验性应用,期间累计下潜100余次,形成和建立了科学完善的应用保障体系和专业的应用人才队伍。以"蛟龙"号试验性应用中运行与保障的实践经验为基础,针对其中设备与备品备件管理、运行作业管理、拆检总装管理、数据资料查询与利用等方面的重要需求,设计开发了一套"蛟龙"号载人潜水器运行与保障信息管理系统,通过信息化平台实现设备资源、作业成果以及经验积累传承之间的高效衔接与复用,最大限度地降低装备运行成本、提高作业效率、保障海上作业安全。文章提出的载人潜水器运维体系能够为我国其他行业或部门的载人潜水器、远程缆控机器人(ROV)、水下自治机器人(AUV)等重大海洋装备的运行与保障提供有益参考借鉴。  相似文献   

广州城市流浪乞讨者的空间管治与日常生活实践   总被引：2，自引：0，他引：2  

尹铎  蔡慕言  梁金多  朱竑  高权 《地理科学》2019,39(3):450-458

以广州流浪乞讨者为研究对象,通过深度访谈等质性研究方法,解读针对流浪乞讨者的空间管治政策与手段,分析流浪乞讨者的日常生活实践与生境协商。研究发现：在地方城市政策对流动性与公共秩序限制的双重压力下,在流浪乞讨者的日常生活实践中,不仅有针对管治行动者而刻意为之的特殊营建,亦有基于程式化生活流程对自我身份认同的重塑与真情实感的展演。地方政府基于空间目标的救助与真实存在的日常生活实践存在着一种张力。研究关注了城市边缘群体日常生活对地理意义的主动塑造过程,对全面理解并规范管理中国城市流浪乞讨现象具有借鉴意义。  相似文献   

A novel coupled FDM-DEM modelling method for flexible membrane boundary in laboratory tests     

Hua-Xiang Zhu  Zhen-Yu Yin  Qiang Zhang 《国际地质力学数值与分析法杂志》2020,44(3):389-404

Difficulties are involved in discrete element method (DEM) modelling of the flexible boundary, that is, the membranes covering the soil sample, which can be commonly found in contemporary laboratory soil tests. In this paper, a novel method is proposed wherein the finite difference method (FDM) and DEM are coupled to simulate the rubber membrane and soil body, respectively. Numerical plane strain and triaxial tests, served by the flexible membrane, are implemented and analysed later. The effect of the membrane modulus on the measurement accuracy is considered, with analytical formulae derived to judge the significance of this effect. Based on an analysis of stress-strain responses and the grain rotation field, the mechanical performances produced by the flexible and rigid lateral boundaries are compared for the plane strain test. The results show that (1) the effect of the membrane on the test result becomes more significant at larger strain level because the membrane applies additional lateral confining pressure to the soil body; (2) the tested models reproduce typical stress and volumetric paths for specimens with shear bands; (3) for the plane strain test, the rigid lateral boundary derives a much higher peak strength and larger bulk dilatation, but a similar residual strength, compared with the flexible boundary. The latter produces a more uniform (or ‘diffuse') rotation field and more mobilised local kinematics than does the former. All simulations show that the proposed FDM-DEM coupling method is able to simulate laboratory tests with a flexible boundary membrane.  相似文献   

Directional interpolation infinite element for dynamic problems in saturated porous media     

Xiong Hao  Chen Qingsheng  Zhu Bingjian 《地震工程与工程振动(英文版)》2020,19(3):625-635

In this study, a directional interpolation infinite element suited to a saturated porous medium is presented to account for dynamic problems with semi-infi  相似文献   

Bibliometric Analysis of Global Research Progress on Coastal Flooding 1995–2016     

Chao Gao  Tian Ruan 《中国地理科学(英文版)》2018,28(6):998-1008

Global research progress on coastal flooding was studied using a bibliometric evaluation of publications listed in the Web of Science extended scientific citation index. There was substantial growth in coastal flooding research output, with increasing publications, a higher collaboration index, and more references during the 1995–2016 period. The USA has taken a dominant position in coastal flooding research, with the US Geological Survey leading the publications ranking. Research collaborations at institutional scales have become more important than those at global scales. International collaborative publications consistently drew more citations than those from a single country. Furthermore, coastal flooding research included combinations of multi-disciplinary categories, including ‘Geology' and ‘Environmental Sciences Ecology'. The most important coastal flooding research sites were wetlands and estuaries. While numerical modeling and 3 S(Remote sensing, RS; Geography information systems, GIS; Global positioning systems, GPS) technology were the most commonly used methods for studying coastal flooding, Lidar gained in popularity. The vulnerability and adaptation of coastal environments, their resilience after flooding, and ecosystem services function showed increases in interest.  相似文献   

Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials          下载免费PDF全文

Chao Jiang  Gao‐Feng Zhao 《国际地质力学数值与分析法杂志》2018,42(4):674-693

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.  相似文献   

Study of the flood control scheduling scheme for the Three Gorges Reservoir in a catastrophic flood          下载免费PDF全文

Shanghong Zhang  Zhu Jing  Wenda Li  Yujun Yi  Yong Zhao 《水文研究》2018,32(11):1625-1634

The Three Gorges Project is the world's largest water conservancy project. According to the design standards for the 1,000‐year flood, flood diversion areas in the Jingjiang reach of the Yangtze River must be utilized to ensure the safety of the Jingjiang area and the city of Wuhan. However, once these areas are used, the economic and life loss in these areas may be very great. Therefore, it is vital to reduce this loss by developing a scheme that reduces the use of the flood diversion areas through flood regulation by the Three Gorges Reservoir (TGR), under the premise of ensuring the safety of the Three Gorges Dam. For a 1,000‐year flood on the basis of a highly destructive flood in 1954, this paper evaluates scheduling schemes in which flood diversion areas are or are not used. The schemes are simulated based on 2.5‐m resolution reservoir topography and an optimized model of dynamic capacity flood regulation. The simulation results show the following. (a) In accord with the normal flood‐control regulation discharge, the maximum water level above the dam should be not more than 175 m, which ensures the safety of the dam and reservoir area. However, it is necessary to utilize the flood diversion areas within the Jingjiang area, and flood discharge can reach 2.81 billion m³. (b) In the case of relying on the TGR to impound floodwaters independently rather than using the flood diversion areas, the maximum water level above the dam reaches 177.35 m, which is less than the flood check level of 180.4 m to ensure the safety of the Three Gorges Dam. The average increase of the TGR water level in the Chongqing area is not more than 0.11 m, which indicates no significant effect on the upstream reservoir area. Comparing the various scheduling schemes, when the flood diversion areas are not used, it is believed that the TGR can execute safe flood control for a 1,000‐year flood, thereby greatly reducing flood damage.  相似文献   

Numerical Simulation of the Vortex-Induced Vibration of A Curved Flexible Riser in Shear Flow     

Hong-jun Zhu  Peng-zhi Lin 《中国海洋工程》2018,32(3):301-311

A series of fully three-dimensional(3 D) numerical simulations of flow past a free-to-oscillate curved flexible riser in shear flow were conducted at Reynolds number of 185–1015. The numerical results obtained by the two-way fluid–structure interaction(FSI) simulations are in good agreement with the experimental results reported in the earlier study. It is further found that the frequency transition is out of phase not only in the inline(IL) and crossflow(CF) directions but also along the span direction. The mode competition leads to the non-zero nodes of the rootmean-square(RMS) amplitude and the relatively chaotic trajectories. The fluid–structure interaction is to some extent reflected by the transverse velocity of the ambient fluid, which reaches the maximum value when the riser reaches the equilibrium position. Moreover, the local maximum transverse velocities occur at the peak CF amplitudes, and the values are relatively large when the vibration is in the resonance regions. The 3 D vortex columns are shed nearly parallel to the axis of the curved flexible riser. As the local Reynolds number increases from 0 at the bottom of the riser to the maximum value at the top, the wake undergoes a transition from a two-dimensional structure to a 3 D one. More irregular small-scale vortices appeared at the wake region of the riser, undergoing large amplitude responses.  相似文献   

Soil and Vegetation Spectral Coupling Difference (SVSCD) for Minerals Extraction from Hyperion Data in Vegetation Covered Area     

Shengbo Chen  Shuang Huang  Yanli Liu  Chao Zhou 《中国地理科学(英文版)》2018,28(6):957-972

Remote sensing data have been widely applied to extract minerals in geologic exploration, however, in areas covered by vegetation, extracted mineral information has mostly been small targets bearing little information. In this paper, we present a new method for mineral extraction aimed at solving the difficulty of mineral identification in vegetation covered areas. The method selected six sets of spectral difference coupling between soil and plant (SVSCD). These sets have the same vegetation spectra reflectance and a maximum different reflectance of soil and mineral spectra from Hyperion image based on spectral reflectance characteristics of measured spectra. The central wavelengths of the six, selected band pairs were 2314 and 701 nm, 1699 and 721 nm, 1336 and 742 nm, 2203 and 681 nm, 2183 and 671 nm, and 2072 and 548 nm. Each data set’s reflectance was used to calculate the difference value. After band difference calculation, vegetation information was suppressed and mineral abnormal information was enhanced compared to the scatter plot of original band. Six spectral difference couplings, after vegetation inhibition, were arranged in a new data set that requires two components that have the largest eigenvalue difference from principal component analysis (PCA). The spatial geometric structure features of PC1 and PC2 was used to identify altered minerals by spectral feature fitting (SFF). The collecting rocks from the 10 points that were selected in the concentration of mineral extraction were analyzed under a high-resolution microscope to identify metal minerals and nonmetallic minerals. Results indicated that the extracted minerals were well matched with the verified samples, especially with the sample 2, 4, 5 and 8. It demonstrated that the method can effectively detect altered minerals in vegetation covered area in Hyperion image.  相似文献